Introduction
Screenflow 9 screen recorder & video editor 9 0. Snippetslab 1 6 6. Slots vegas rush. Shop 2018 Buick Enclave vehicles for sale at Cars.com. Farming simulator 17 pc. Create 3d drawing online. Backgrounds 3 0 – dynamic desktop wallpapers 1920x1080. Research, compare and save listings, or contact sellers directly from 3 2018 Enclave models nationwide.
We would like to thank Kolink for supplying the review sample.
- The enclave can perform functions that require a task environment, such as supervisor calls. Tasks can dynamically leave and join an enclave as they finish one piece of work and begin another. The subsystem creates an enclave using the IWM4ECRE macro, and then the task joins the enclave using the IWMEJOIN macro. Comparison to Other Services.
- Jan 31, 2019 Enclave 2.1.0.12 1.62 GB Mac Platform: Intel Includes: Pre-K'ed OS version: 10.7+ Processor type(s) & speed: 2GHz Core 2 Duo RAM minimum: Video.
Enclave units come in three flavors, in capacities of 500 W, 600 W, or 700 W. All are 80 PLUS Gold certified and Cybenetics ETA-A efficiency and LAMBDA-A noise certified, which means they indeed are efficient and silent.
The PSU only has modular cables, but all are sufficiently long. With the exception of the EPS connector, there are also enough connectors. Finally, the distance between peripheral connectors is short at only 120 mm. Ideally, these should be 150 mm apart.
There are no large heatsinks on this platform, which uses a full-bridge topology along with an LLC resonant converter on the primary side. On the secondary side, a pair of DC-DC converters generate the minor rails. Kolink didn't want to reveal the name of the original manufacturer (OEM) and only stated that they also had a role in the design, which is why I cited Kolink as the OEM in the table above.
The transient filter is complete, and the single bridge rectifier is bolted to a small heatsink.
There is an MOV and an NTC thermistor, which is supported by a bypass relay.
The APFC converter uses a single Teapo cap rated at 105 °C. After the hold-up cap, four FETs chop the DC signal into short pulses—their amplitude is the magnitude of the input voltage. The duty cycle is controlled by a Champion CM6901 controller.
The +12V FETs are installed on the solder side of the PCB, along with several other interesting components.
Considering the retail price, soldering quality is actually very good.
Almost all filtering caps are provided by Teapo. I am not fond of the SC line because of its low lifetime. Thankfully, eight polymer caps also help with ripple filtering.
The DC-DC converters that handle the minor rails.
The 5VSB regulator circuit.
The cooling fan uses a rifle bearing; that is, according to Kolink's PSU product manager. However, the same model is used and described as a sleeve-bearing fan in other budget PSUs. I asked Kolink's PSU PM, and he said that the same model number is used for several types of fans to save money on safety certifications. Indeed, several other fan vendors do use the same model number for both rifle and plain sleeve bearing fans.3
'Enclave City' - a huge underground city inhabited by forever 'snorts' Villager! More than 100 of houses, a large lighted castle and long lights hanging from the ceiling of the cave .
Specifications
| Kolink KL-G700FM Features & Specifications | |
|---|---|
| Max. DC Output | 700 W |
| PFC | Active PFC |
| Efficiency | ETA-A & 80 PLUS Gold |
| Noise | LAMBDA-A |
| Modular | ✓ |
| Intel C6/C7 Power State Support | ✓ |
| Operating Temperature | 0–40 °C |
| Protections | Over Voltage Protection Under Voltage Protection Over Power Protection Over Temperature Protection Over Current Protection Short Circuit Protection |
| Cooling | 120 mm rifle bearing fan (EFS-12E12H) |
| Semi-passive Operation | No |
| Dimensions | 150 mm (W) x 85 mm (H) x 160 mm (D) |
| Weight | 1.57 kg (3.46 lb) |
| Compliance | ATX12V v2.31, EPS 2.92 |
| Warranty | 3 years |
| Price at Time of Review (excl. VAT) | 67.14€ |
| Kolink KL-G700FM Power Specs | |||||
|---|---|---|---|---|---|
| Rail | 3.3 V | 5 V | 12 V | 5 VSB | -12 V |
| Max. Power | 16 A | 16 A | 58 A | 3 A | 0.5 A |
| 100 W | 696 W | 15 W | 6 W | ||
| Total Max. Power | 700 W |
Cables and Connectors
| Modular Cables | ||||
|---|---|---|---|---|
| Description | Cable Count | Connector Count (Total) | Gauge | In Cable Capacitors |
| ATX connector 20+4 pin (500 mm) | 1 | 1 | 18-22AWG | No |
| 4+4 pin EPS12V (650 mm) | 1 | 1 | 18AWG | No |
| 6+2 pin PCIe (600 mm+100 mm) | 2 | 4 | 18AWG | No |
| SATA (450 mm+120 mm+120 mm) | 2 | 6 | 20AWG | No |
| SATA (450 mm) / 4-pin Molex (+120 mm+120 mm) | 2 | 2 / 4 | 20AWG | No |
The PSU only has modular cables, but all are sufficiently long. With the exception of the EPS connector, there are also enough connectors. Finally, the distance between peripheral connectors is short at only 120 mm. Ideally, these should be 150 mm apart.
Component Analysis
| Kolink KL-G700FM Parts Description | |
|---|---|
| General Data | |
| Manufacturer (OEM) | Kolink |
| PCB Type | Double Sided |
| Primary Side | |
| Transient Filter | 4x Y caps, 2x X caps, 2x CM chokes, 1x MOV |
| Bridge Rectifier(s) | 1x GBU1506 (600 V, 15 A @ 100 °C) |
| Inrush Current Protection | NTC Thermistor & Relay |
| APFC MOSFETs | 2x Infineon IPA50R190CE (550 V, 15.7 A @ 100 °C, 0.19 Ohm) |
| APFC Boost Diode | 1x Infineon IDH06G65C6 (650 V, 6 A @ 145 °C) |
| Hold-up Cap(s) | 1x Teapo (420 V, 560 uF, 2,000 h @ 105 °C, LG) |
| Main Switchers | 4x Great Power GPT13N50D (500 V, 13 A, 0.49 Ohm) |
| APFC Controller | On Semiconductor NCP1654 |
| Resonant Controller | Champion CM6901T6 |
| Topology | Primary side: Full-Bridge & LLC converter Secondary side: Synchronous Rectification & DC-DC converters |
| Secondary Side | |
| +12V | 6x Infineon PSMN1R4-40YLD (40 V, 214 A @ 100 °C, 2.65 mOhm @ 175 °C) |
| 5V & 3.3V | DC-DC Converters: 4x Excelliance MOS EMB09N03HR (30 V, 35 A @ 100 °C, 9.5 mOhm) PWM Controllers: ANPEC APW7159 |
| Filtering Capacitors | Electrolytics: 7x Teapo (1 - 3,000 h @ 105 °C, SC), 3x Teapo (2,000 h @ 105 °C, SH), 1x Asia'x (105°C, TMX) Polymers: 8x Teapo |
| Supervisor IC | IN1S313I-DAG & UTC393 |
| Fan Model | DWPH EFS-12E12H (120 mm, 12 V, 0.50 A, Rifle Bearing Fan) |
| 5VSB Circuit | |
| Rectifier(s) | 1x Diodes Incorporated MBR2045CT SBR (45 V, 20 A) |
| Standby PWM Controller | Infineon ICE2QR4765 |
There are no large heatsinks on this platform, which uses a full-bridge topology along with an LLC resonant converter on the primary side. On the secondary side, a pair of DC-DC converters generate the minor rails. Kolink didn't want to reveal the name of the original manufacturer (OEM) and only stated that they also had a role in the design, which is why I cited Kolink as the OEM in the table above.
The transient filter is complete, and the single bridge rectifier is bolted to a small heatsink.
There is an MOV and an NTC thermistor, which is supported by a bypass relay.
The APFC converter uses a single Teapo cap rated at 105 °C. After the hold-up cap, four FETs chop the DC signal into short pulses—their amplitude is the magnitude of the input voltage. The duty cycle is controlled by a Champion CM6901 controller.
The +12V FETs are installed on the solder side of the PCB, along with several other interesting components.
Considering the retail price, soldering quality is actually very good.
Almost all filtering caps are provided by Teapo. I am not fond of the SC line because of its low lifetime. Thankfully, eight polymer caps also help with ripple filtering.
The DC-DC converters that handle the minor rails.
The 5VSB regulator circuit.
The cooling fan uses a rifle bearing; that is, according to Kolink's PSU product manager. However, the same model is used and described as a sleeve-bearing fan in other budget PSUs. I asked Kolink's PSU PM, and he said that the same model number is used for several types of fans to save money on safety certifications. Indeed, several other fan vendors do use the same model number for both rifle and plain sleeve bearing fans.3
'Enclave City' - a huge underground city inhabited by forever 'snorts' Villager! More than 100 of houses, a large lighted castle and long lights hanging from the ceiling of the cave .
Download Enclave City map for Minecraft PE 0.12.1
2-1 0 Lyrics
- Category: Maps for Minecraft Pocket Edition
Recommend:
Bai Hat 2-1 0
- Ceylon city map for Minecraft PE 0.11.0'Ceylon city' - a metropolitan area where you can find everything from functional casino and sports stadiums to massive apartment complexes and supermarkets.
- Alleron City map for Minecraft 1.8Here is one of the largest cities ever created in Minecraft.
- New York City 3005 map for Minecraft Pocket Edition 0.10.4Map is a city of the future, the creator wants to recreate New York in the same form as he, in his opinion, will look in the future (3005 year).
- GIGANTIC CITY map for Minecraft PE 0.9.5We want to show you the most, even a giant city!
- New Bloxten City map for Minecraft Pocket Edition 0.9.5On this map for Minecraft Pocket Edition 0.9.5.2 you will find a beautiful city with a lot of all kinds of buildings
